TORPEDO BUMPER

Great looking all vinyl bumpers (no painted foam) fit neatly around the upright at the point where the cross-arm fastens.  They offer protection for your boat from the post or clamp.  18” long bumpers come in 4 non-fading colors.

STACKABLE BUMPER EXTENSIONS

Only from Alumi-Span!  Sometimes, especially with pontoon boats, regular torpedo bumpers aren’t high enough.  Our stackable bumpers fit right over them to create any height you need in 10” increments.  Also stacks down the upright using a locking clip to protect jet skis and other small water craft.  15” upright extensions are available to accommodate this product without buying another large upright.

SIDE AND DOCK END BUMPERS

Complete protection for your boat with the industry’s best selection of color coordinated bumpers. Picture below illustrates a near fool proof system for protecting a pontoon boat while docking even in changing water levels.  Heavy duty, fade free vinyl material extends both below and above the deck surface to protect Jet Ski hoods and boat bows.  Many standard sizes and 4 colors available.

ALUMINUM END CAPS

These metal caps are designed to safely cover the sharp corners on a section end and at the same time “dress up” the dock.  They’re a good choice for covering the first section end on shore.  They also can used to cover the open end of a party platform.  End Caps include 2 - #1100 castings.  3’, 4’, 6’, 8’, 9’, & 12’ lengths are standard.  Special versions called “L” caps are used to cover the open end at a dock corner and have only one casting. “L” caps come in 3’, 4’, 6’, 8’, and 9’ lengths.

REMOVABLE LADDER

Can be used for docks, swim platforms and pontoon boats.  Constructed with anodized aluminum and stainless steel fasteners and brackets, it’s designed to last decades.  The 3 step shallow water model reaches 33” below the dock surface and the 4 step reaches 45” allowing someone to swim up to the ladder and easily climb up.  Ladders can be removed in seconds without tools.

DOCK / SEAWALL STAIRS

These rugged units are aluminum frame with an aggressive Poly tread that grips under water even when covered with algae.  Flow through design resist wave action (pole attachments are also available).  Unlike most stairs, our risers are covered to prevent feet and legs from slipping through (remember you often cannot see where you’re stepping under water. Also perfect to allow dogs to get into the water.  Comes in 2, 3, 4, & 5 step models.  Each step gains 9”.  Handrails for either side are available.

DOCK LIGHTS

These high quality solar lights are very powerful and can be set for two levels of brightness.  They feature replaceable LED lights, and Ni/Cad rechargeable batteries.  Colored bulbs can be specified and BEST OF ALL, they are specifically designed to fit over a dock upright.  Adaptors for different size uprights are available.

POST RATCHET

These cast aluminum units make installing and removing augers much easier.  Fits up to 2 1/8” O.D. tube and comes with a 19” metal handle.  Ratchet mechanism is reversible.

POLY BENCH

Why put up with high maintenance wood or iron benches.  Ours are sturdy 4’ & 5’ units that are contoured to fit your body.  They look great and are not easily pushed around by the wind.  Several colors are available.

POLYWOOD DOCK / DECK CHAIRS

No maintenance chairs are made of fade resistant polyethylene material and stainless fittings.  They are comfortable and have enough heft to resist strong winds.  They come in numerous colors and including black, white, red, royal blue, yellow, teak, and hunter green.  When combined with Alumi-Span bumper colors, you can easily match them to your boat or house.  Matching Ottoman and side table are also available

FLAG POLE

Aluminum flag poles are 20’ high and collapse to 10’ for storage.  Best of all, they are designed to fit perfectly over a 2” O.D. upright allowing them to be installed in seconds on your Alumi-Span dock. Adaptors for 1 7/8’ uprights are available

45 DEG. CORNER SECTION

45 deg. corner sections are the perfect place to mount a ladder.  They can also be used to keep children from jumping over dock corners.  45 deg. corner sections simply slide into any dock “L” shape that uses 4” high stringers (the most common type). Stainless steel pins hold them firmly.

TELESCOPING LEG ASSEMBLIES

These leg assemblies can be used anywhere you have tough to adjust blind uprights - typically under a dock.  Adjustments are easily made with one turn of a 9/16” open end wrench.  Standard height ranges are 18”-36”; 36”-54”; and 54”-72”.  Assembly includes cast telescopic bracket and 2” O.D upper tube, 2.3” O.D. lower tube and special bottom plate.  These telescoping legs may be used in combination with Alumi-Span’s unique Under Dock Leg Mount Kit so that uprights can be hidden under the dock either for esthetic or practical reasons.

UNDER DOCK LEG MOUNT KIT

Special #350 Stringer Brackets mount inside of the stringers and allow uprights to mount directly under them for a “pole-less” look.  Using special size cross-arms, one or both uprights per standard assembly can be hidden.  We highly recommend our Telescoping Leg Assemblies be used with this mount kit to facilitate easy adjustment.

ANGLED TURNS

Alumi-Span’s capability to customize a dock includes angled turns and “Y” configurations as shown in the photos below.  We can also modify the first section allowing you to build the dock at an angle to the seawall. 

SEAWALL BRACKETS

Our heavy duty brackets are made of aluminum channel.  They easily bolt flush to the top of most seawall designs unless they are made of slanted concrete (see “L” brackets).  The end of any 4” high dock section fits right inside this channel and is secured simply by dropping a bolt into a 3/8” hole drilled in the top of each corner.

“L” BRACKETS

These handy, strong 2” X 2” aluminum brackets have many uses.  Many dock first sections are set on top of a sea wall or a board imbedded on the shore.  These brackets allow you to bolt the first section to these surfaces precisely locating the position and direction of the entire dock.  This is an important consideration if you want to reduce installation times.  On slanted concrete seawalls, these brackets can be bolted to the seawall at an angle and then bolted to the stringer on each side of the deck using the existing 17/32” holes or by drilling a new one where needed.  In order to have the first section flush with the top of the wall, we can angle the stringers for a nice neat fit.